A2 stainless socket cap screw M6 x 50, used for rocker cover bolt on 2 valve Breva 1100, Sport 1200, Cali Vintage, Norge etc... and Daytona and Centauro. 8 bolts required for these applications.

 More than 5 in stock

 05025932 GU05025932 05 02 59 32
 0502 5932 0502.5932 05.02.59.32

Clutch adjustment locknut for gearbox rear, locks adjustment of freeplay on clutch arm. Also used as tappet adjuster nut on early 750 and Nuovo Falcone models

Also known as Guzzi ref. 92606508

 More than 5 in stock

 92602508 GU92602508 92 60 25 08
 9260 2508 9260.2508 92.60.25.08

Aluminium crush washer for large sump drain and filler plugs (big twins)

We advise changing this at every oil change. Can be used in place of Guzzi ref. 90714195

 More than 5 in stock

 95100709 GU95100709 95 10 07 09
 9510 0709 9510.0709 95.10.07.09

A2 M6 x 40mm stainless steel socket cap screw

 More than 5 in stock

Black wavy washer

Used under cylinder stud plug on many big twins

 More than 5 in stock

 95129180 GU95129180 95 12 91 80
 9512 9180 9512.9180 95.12.91.80

A2 stainless steel hex head bolt

Same spec as Guzzi ref. 98074420 but in stainless rather than self colour

 More than 5 in stock

 98054520 GU98054520 98 05 45 20
 9805 4520 9805.4520 98.05.45.20

A2 stainless socket cap screw M6 x 25

Used for rocker cover, timing cover, sump (no extension), VHB30 inlet manifold on 850/1000 models and rocker cover, timing cover, sump, inlet manifolds on V50, V35. Also used for rocker cover and sump on all two valve per cylinder Brevas, Grisos etc... (16 required per engine). Also known as Guzzi refs. 98692325 and 98620325 can be used in place of 98822325

 More than 5 in stock

05025930-z 05025930 GU05025930 05 02 59 30
 0502 5930 0502.5930 05.02.59.30

A2 M6 x 35mm stainless steel socket cap screw used for timing cover,and gearbox cover on big twins. Also use for fitting our billet rocker cover protectors (ACA17941 / ACA14940)

Also used in place for Guzzi ref. 98680335 or 884039

 More than 5 in stock

 98690335 GU98690335 98 69 03 35
 9869 0335 9869.0335 98.69.03.35

A2 stainless socket cap screw M6 x 55, used for long sump bolt on 850/1000 models where there isn't a sump extension, but used for shorter sump bolt where a sump extension is fitted

14 required if used with sump extension, 4 if used without sump extension

 More than 5 in stock

A2 stainless socket cap screw M10 x 30, used for F08/P8 and P9 brake caliper bolts

Also used for front lower frame rail bolts on V7 Classic, V7 Cafe etc... Can be used in place of reduced head bolt Guzzi ref. 03530530 and 564632 and 887878 . Can also be used in place of hex head bolt Guzzi ref. 98054530

 More than 5 in stock

 98682530 GU98682530 98 68 25 30
 9868 2530 9868.2530 98.68.25.30